Brother DCP-9045CDN - Manual (Page 61)

Scanning
54
2
Scanning a document into the PC
2
There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass. (See Pre-Scanning to crop a portion you want to scan using the scanner glass on page 55.)
Scanning a document using the ADF
2
a Put the document face up in the ADF.
b Choose Feeder (Scan one side) or Feeder (Scan both sides) (MFC-9840CDW and DCP-9045CDN
only) in the Source drop-down list (2).
c Adjust the following settings, if needed, in the Scanner dialog box.
1 Profile
2 Source
3 Paper size
4 Color format
5 File type
6 Resolution
7 Brightness
8 Contrast
Note
The scanner resolution can be set as high as 1200 dpi.
For resolutions greater than 1200 dpi, use the Brother Scanner Utility.
1
2
3
4
5
6
7
8