Brother DCP-9045CDN - Manual (Page 58)

Scanning
51
2
f
If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose
Brightness, Contrast, Resolution and Picture type from Advanced Properties. Click OK after you
choose a setting.
g Click the Scan button in the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in the PaperPort™ 11SE window (or your
application window).
Brother Scanner Utility
2
The Brother Scanner Utility is used for configuring the WIA scanner driver for resolutions greater than
1200 dpi and for changing the paper size. If you want to set Legal size as the default size, use this utility to
change the setting. You must restart your PC for the new settings to take effect.
„ Running the utility
You can run the utility by choosing Scanner Utility located in the
Start/All Programs/Brother/MFC-XXXX (or DCP-XXXX) (where XXXX is your model name)/
Scanner Settings/Scanner Utility.
Note
If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make
sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If
you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.