Brother DCP-9045CDN - Manual (Page 42)

Printing
35
1
Advanced options
1
You can access the Advanced options by clicking the Advanced... button on the Layout tab or
Paper/Quality tab.
a Choose the Paper Size and Copy Count (1).
„ Paper Size
From the drop-down box choose the Paper Size you are using.
„ Copy Count
The copy selection sets the number of copies that will be printed.
b
Set the Image Color Management, Scaling and TrueType Font settings (2).
„ Image Color Management
Specifies how to print your color graphics.
• If you don’t want to enable Image Color Management, click ICM Disabled.
• If you want the calculations for color matching to be performed on the host computer before it
sends the document to the printer, click ICM Handled by Host System.
• If you want the calculations for color matching to be performed on your printer, click ICM Handled
by Printer using printer calibration.
„ Scaling
Specifies whether to reduce or enlarge documents, and by what percentage.
„ TrueType Font
Specifies the TrueType font options. Click Substitute with Device Font (the default) to use
equivalent printer fonts for printing documents that contain TrueType fonts. This will permit faster
printing; however, you might lose special characters not supported by the printer font. Click
Download as Softfont to download TrueType fonts for printing instead of using printer fonts.