Belkin G Wireless Modem Router PM01218ea F5D7634-4 - Manual (Page 79)

77
G Wireless Modem Router
sections table of contents 1 2 3 4 5 6 7 8 10 9
aPPendIXes
PPPoe
Most ADSL providers use PPPoE as the connection type If you use an
ADSL modem to connect to the Internet, your ISP may use PPPoE to log
you into the service
Your connection type is PPPoe if:
1 Your ISP gave you a user name and password which is required to
connect to the Internet
2 Your ISP gave you software such as WinPoET or Enternet300 that
you use to connect to the Internet
3 You have to double-click on a desktop icon other than your
browser to get on the Internet
To set the Router to use PPPoE, type in your user name and password
in the spaces provided After you have typed in your information, click
“Apply Changes”
After you apply the changes, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly
PPPoa
Enter the PPPoA information in the provided spaces, and click “Next”
Click “Apply” to activate your settings
1 User name - Enter the user name (Assigned by your ISP)
2 Password - Enter your password (Assigned by your ISP)
3 Retype Password - Confirm the password (Assigned by your ISP)
4 VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here (Assigned by your ISP)
disconnect after X
This feature is used to automatically disconnect the Router from your
ISP when there is no activity for a specified period of time For instance,
placing a check mark next to this option and entering “5” into the minute
field will cause the Router to disconnect from the Internet after five
minutes of no Internet activity
This option should be used if you pay for your Internet service by
the minute