Belkin G Wireless Modem Router PM01218ea F5D7634-4 User Manual
Page 59
57
G Wireless Modem Router
sections
table of contents
1
2
3
4
5
7
8
9
10
6
ManUallY ConfIGURInG neTWoRK adaPTeRs
Windows 98se or Me
1
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu
3
If “Specify an IP address”
is selected, your Router will
need to be set up for a static
IP connection type Write
the address information
in the table below You
will need to enter this
information into the Router
2
Select “TCP/IP -> settings”
for your installed network
adapter You will see the
following window
4
Write down the IP address and subnet mask from the “IP
Address” tab
(3)
5
Click the “Gateway” tab
(2) Write down the gateway address in
the chart
6
Click the “DNS Configuration” tab
(1) Write down the DNS
address(es) in the chart
7
If not already selected, select “Obtain an IP address automatically”
on the “IP Address” tab Click “OK” Restart the computer When
the computer restarts, your network adapter(s) are now configured
for use with the Router Set up the computer that is connected to
the cable or DSL modem by FIRST using these steps You can also
use these steps to add computers to your Router after the Router
has been set up to connect to the Internet
(1)
(2)
(3)