Belkin G Wireless Modem Router PM01218ea F5D7634-4 - Manual (Page 74)

72
G Wireless Modem Router
sections table of contents 1 2 3 4 5 6 7 9 10 8
TRoUblesHooTInG
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network
solution:
Clients must use the same key that the wireless router or access point uses For instance if the key is “Smith Family Network Key” in the wireless
router or access point, the clients must also use that same key
IMPoRTanT: WPA-PSK is a mixture of numbers and letters from
A–Z and 0–9 For WPA-PSK you can enter eight to 63 characters This
network key needs to match the key you assign to your wireless router
or access point
1 Double-click the “Signal Indicator” icon to bring up the “Wireless
Network” screen
2 The “Advanced” button will allow you to view and configure more
options of the Card
3 Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card
4 Under the “Wireless Network Properties” tab, select a
network name from the “Available networks” list and click the
“Properties” button
5 Under “Network Authentication” select “WPA-PSK (no server)
6 Type your WPA key in the “Network key” box
7 Click “OK, then “Apply” to save the settings