Belkin G Wireless Modem Router PM01218ea F5D7634-4 - Manual (Page 11)

9
G Wireless Modem Router
sections table of contents 1 2 4 5 6 7 8 9 10 3
KnoWInG YoUR RoUTeR
6 adsl line
This port is for connection to your ADSL line Connect your ADSL line to
this port
7 ethernet Ports
The Ethernet ports are RJ45, 10/100 auto-negotiation The ports are
labeled 1 through 4 These ports correspond to the numbered LEDs on
the front of the Router Connect your network-enabled computers or any
networking devices to one of these ports
8 Reset button
The “Reset” button is used in rare cases when the Router may function
improperly Resetting the Router will restore the Router’s normal
operation while maintaining the programmed settings You can also
restore the factory default settings by using the “Reset” button Use
the restore option in instances where you may have forgotten your
custom password
a Resetting the Router
Push and hold the “Reset” button for one second then release
it When the “Power/Ready” light becomes solid again, the reset
is complete
b Restoring the factory defaults
Press and hold the “Reset” button for 20 seconds then release
it When the “Power/Ready” light becomes solid again, the
restore is complete
9 Power Plug
Connect the included power supply to this inlet Using the wrong type of
power adapter may cause damage to your Router