Belkin G Wireless Modem Router PM01218ea F5D7634-4 - Manual (Page 65)

63
G Wireless Modem Router
sections table of contents 1 2 3 4 5 6 7 9 10
TRoUblesHooTInG
8
Problem:
The ADSL LED is not on
solution:
1 Check the connection between the Router and ADSL line Make
sure the cable from the ADSL line is connected to the port on the
Router labeled “DSL Line”
2 Make sure the Router has power The Power LED on the front
panel should be illuminated
Problem:
The Internet LED is not on
solution:
1 Make sure the cable from the ADSL line is connected to the port on
the Router labeled “DSL Line” and the ADSL LED is on
2 Make sure you have the correct VPI/VCI, user name, and password
from your ISP provider
Problem:
My connection type is static IP address I cannot connect to
the Internet
solution:
Since your connection type is static IP address, your ISP must assign
you the IP address, subnet mask, and gateway address Instead of using
the Wizard, go to “Connection Type”, and then select your connection
type Click “Next”, select “Static IP”, and enter your IP address, subnet
mask, and default gateway information
Problem:
I’ve forgotten or lost my password
solution:
Press and hold the “Reset” button on the rear panel for at least six
seconds to restore the factory defaults