B&K AVR307 User Manual

Page 70

Link Zone 2 (B) input to Zone 1 (A) input selection - Zone 2 (B) input source selection may be linked with Zone
1 (A) source selections. In operation, whenever a source selection is detected (remote, front panel or RS-232) on
Zone 1 (A), source linkage will cause the source to be selected on both zones. Independent source selection is
still available with Zone 2 (B) remote control, but any Zone 1 (A) source selection supersedes the previous Zone 2
(B) selection.

ADVANCED ZONE B SETTINGS
1 Level Control Variable
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No

next item adjust
MENU advanced setup

5 Link Input to Zone A No

=% /,1. 65&

set to Yes or No

VOLUME KNOB

(REW) or

(FF)

move to Link Input to Zone A

∧

(UP) or

∨

(DOWN)

(PAUSE) or

(STOP)

Action

From Front Panel

From Remote

Link Zone 2 (B) power to Zone 1 (A) power - Zone 2 (B) power On/Off may be linked to Zone 1 (A). In operation,
whenever power is set to On in Zone 1 (A) the power linkage feature will cause power to be set accordingly on
Zone 2 (B). Zone 2 (B) Independent power on/off is still operational with the Zone 2 (B) remote control, but any
Zone 1 (B) power command supersedes the previous Zone 2 (B) power on/off.

ADVANCED ZONE B SETTINGS
1 Level Control Variable
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No

next item adjust
MENU advanced setup

6 Link Power to Zone A No

=% /,1. 3:5

return to ADVANCED SYSTEM SETUP

∠