B&K AVR307 - Manual (Page 37)

return to SETUP SYSTEM ∠
MENU MENU 6
repeat until desired result is achieved repeat 1 - 4 repeat 1 - 4 5
set to desired values VOLUME KNOB ˆ
(REW) or
‡
(FF) 4
move to Notch, Bass or Treble adjustments ∧
(UP) or
∨
(DOWN)
­
(PAUSE) or
V
(STOP) 3
set to desired frequency VOLUME KNOB ˆ
(REW) or
‡
(FF) 2
move to Test Tone frequency ∧
(UP) or
∨
(DOWN) ­ (PAUSE) or V (STOP) 1
Action From Front Panel From Remote
Setup up the notch filter - your receiver may be set to correct accentuated bass information caused by room
size and speaker positioning. The notch filter setup is independent of any other EQ settings and is engaged at all
times, regardless of the EQ selection.
SETUP ROOM EQUALIZATION
Test Tone 100.0 Hz Off
Notch 100.0 Hz 0.0 dB
Notch Width 97.6 - 102.4 Hz
Bass 100.0 Hz 0.0 dB
Treble 10.0 kHz 0.0 dB
next item adjust
MENU setup system
7(67 721( 2))
100.0 Hz
return to SETUP SYSTEM
∠
MENU MENU 8
repeat until bass accentuation is reduced repeat 1 - 6 repeat 1 - 6 7
set to desired notch width VOLUME KNOB
ˆ
(REW) or
‡
(FF) 6
move to Notch Width ∧
(UP) or
∨
(DOWN) ­ (PAUSE) or V (STOP) 5
set to desired notch level VOLUME KNOB
ˆ
(REW) or
‡
(FF) 4
move to Notch Level
∧
(UP) or
∨
(DOWN)
­
(PAUSE) or
V
(STOP) 3
set to desired notch frequency VOLUME KNOB
ˆ
(REW) or
‡
(FF) 2
move to Notch Frequency ∧
(UP) or
∨
(DOWN) ­ (PAUSE) or V (STOP) 1
Action From Front Panel From Remote
34 p/n 12858 Rev. 0717A