B&K AVR307 - Manual (Page 41)

SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
9,'(2 0$18$/
4 Z1 Monitor Video Manual
adjust for desired operation VOLUME KNOB
ˆ
(REW) or
‡
(FF) 2
move to Zone 1 (A) Video Monitor ∧
(UP) or
∨
(DOWN)
­
(PAUSE) or
V
(STOP) 1
Action From Front Panel From Remote
Set the Zone 1 (A) Monitor Aspect Ratio - During normal operation, your receiver will overlay status information
on your video monitor. This information is normally displayed at the bottom of the monitor. However, if you are
viewing letterbox material on a 16:9 (widescreen) monitor, this information will be cut off. Selecting the 16:9
monitor aspect ratio will position the status display within the letterbox viewing area. This setting does NOT affect
setup menus. Your monitor must be set for normal 4:3 viewing in order to display the entire menu page.
SETUP DISPLAYS
1 Front Panel Bright
2 Overlay Opaque Bright
3 Backround Color Blue
4 Z1 Monitor Video Manual
5 Z1 Monitor Aspect 4 : 3
next item adjust
MENU setup system
$63(&7
5 Z1 Monitor Aspect 4 : 3
return to SETUP SYSTEM ∠
MENU MENU 3
change aspect ratio VOLUME KNOB
ˆ
(REW) or
‡
(FF) 2
move to Zone 1 (A) Monitor Aspect
∧
(UP) or
∨
(DOWN)
­
(PAUSE) or
V
(STOP) 1
Action From Front Panel From Remote
38 p/n 12858 Rev. 0717A