B&K AVR307 User Manual
Page 35
Set subwoofer phase - In addition to the subwoofer location adjustment (see Speaker Location above), your
receiver has an option to ‘invert the phase’ of the information sent to the subwoofer. This adjustment is sometimes
needed to correct ‘lack of low end’ problems created with the interaction between the subwoofer and other large
speakers in a listening room. The correct subwoofer phase adjustment is the one which allows the loudest
listening level.
SETUP CROSSOVERS + LFE
1 Crossover 80.0 Hz THX
2 High Pass 12.0 dB THX
3 Low Pass 24.0 dB THX
4 Peak Limiter 0.0 dB
5 LFE Level 0.0 dB
6 DTS LFE Mode Movie
7 Subwoofer Phase Normal
next item adjust
MENU setup speakers
7 Subwoofer Phase Normal
68% 3+$6( ,19(57
return to SETUP SYSTEM
∠
MENU
MENU
4
return to SETUP SPEAKERS
∠
MENU
MENU
3
adjust to desired value
VOLUME KNOB
(REW) or
(FF)
2
move to DTS LFE Mode
∧
(UP) or
∨
(DOWN)
(PAUSE) or
V
(STOP)
1
Action
From Front Panel
From Remote
32
p/n 12858 Rev. 0717A