B&K AVR307 User Manual
Page 68
activate ADVANCED ZONE B SETTINGS
↵
(ENTER)
SEL or ENTER
2
move to Zone 2 Setup (B)
∧
(UP) or
∨
(DOWN)
(PAUSE) or
V
(STOP)
1
Action
From Front Panel
From Remote
Zone 2 (B) Level Control - You may wish to install an in-wall volume control in your second zone. This can cause
confusion between your receiver’s internal Zone 2 (B) volume controls and your in-wall controls.
WARNING - Setting Zone 2 (B) LEVEL CONTROL to FIXED will cause your receiver to immediately send its
maximum Zone 2 (B) volume to your second zone (if Zone 2 (B) is on). Turn down your in-wall volume
controls before making this change.
ADVANCED ZONE B SETTINGS
1 Level Control Variable
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No
next item adjust
MENU advanced setup
1 Level Control Variable
=% /9/ 9$5,$%/(
ADVANCED ZONE B SETTINGS
1 Level Control Fixed
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No
next item adjust
MENU advanced setup
1 Level Control Fixed
=% /9/
),;('
adjust level to desired value
VOLUME KNOB
(REW) or
(FF)
2
move to Level Control
∧
(UP) or
∨
(DOWN)
(PAUSE) or
V
(STOP)
1
Action
From Front Panel
From Remote
Zone 2 (B) Max (Fixed or Variable) Level - Z2 max level allows you to set a maximum volume level for Zone 2
(B). This is very useful if you are using speakers that can’t handle the maximum power output from your external
amplifier or if you simply wish to limit the volume that can be achieved using normal front panel or remote
operation. If you have chosen Zone 2 (B) level control (fixed), then this setting becomes the fixed level for Zone 2
(B). If you have chosen Zone 2 (B) level control (variable) then this setting allows the level for Zone 2 (B) to be
adjusted. However, when adjusting this level it cannot exceed the value set in Zone 2 (B) max level.
WARNING - If you set this level too low, the receiver may appear broken (no sound).
ADVANCED ZONE B SETTINGS
1 Level Control Variable
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No
next item adjust
MENU advanced setup
2 Fixed Level +15 dB
=% 0$; /(9(/
ADVANCED ZONE B SETTINGS
1 Level Control Fixed
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No
next item adjust
MENU advanced setup
2 Fixed Level +15 dB
=% ),; /(9(/
adjust level to desired value
VOLUME KNOB
(REW) or
(FF)
2
move to Fixed Level
∧
(UP) or
∨
(DOWN)
(PAUSE) or
V
(STOP)
1
Action
From Front Panel
From Remote
65
p/n 12858 Rev. 0717A