Paging a handset, Call monitor – BT On-Air DECTf@x Plus F@x machine and digital telephone system User Manual
Page 60

Using additional handsets
59
3
Press the
green
button.
4
At the other handset - press the
green
button
to connect the internal call. The two
handsets can now talk to each other while
the external caller is on hold.
5
At the first handset - press the
red
button to
end the internal call. Your external caller is
then transferred to the other handset.
Paging a handset
If you want to hail a handset or find out where
it is is, you can page it from the base station.
To page a handset fom the base station
1
At the base station, press
OK/Menu
then
Recall
. The base station display will show
HANDSET NUMBER.
2
On the keypad, enter the handset number
(
1-4
) that you want to contact. If you want to
contact all the handsets at the same time,
press the ✱ button. The display will show
FIND HANDSET.
or
AB
C
2
eg
3
The base station will beep, and the
handset(s) you are contacting will ring.
4
At the handset being contacted, the display
will show a flashing
INTERCOM
icon and the
handset will ring.
Call Monitor
When using a handset, it is possible to listen to
the conversation at the base station as well.
To listen to a call through the base station
1
At the handset- during a call press
OK
then
0
.
The call can now be heard through the base
station loudspeaker.
2
To stop listening through the base station,
press
OK
then
0
again.