BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 20)

Using your fax machine
19
2 Press OK/Menu . The display shows two
options:
YES
Incoming faxes are stored in the
memory, even if there is paper in
the sheet feeder. This is the
default setting.
NO
Incoming faxes are printed as
they are received. If there is no
paper in the sheet feeder, the
faxes are stored in the memory.
3 Use the ᮡ and ᮢ buttons to select NO.
Press
OK/Menu to confirm the change.
To print out received faxes
When you have faxes stored in the memory
the
Fax button light will flash. You can print in
normal mode or economy mode.
Normal
• Make sure you have paper in the sheet
feeder. Press the
Fax button. The stored
faxes will print out.
Economy
This allows you to print out messages reduced
by 50% vertically so that two pages fit onto one
A4 printout.
1 Press OK/Menu then 5 then 7 . The display
shows FAXES IN MEM.
2 Press OK/Menu . Select ECONOMY. You can
toggle between ECONOMY and NORMAL using
the ᮡ and ᮢ buttons.
3 Press OK/Menu to confirm the setting and
the stored faxes are printed in reduced size.
PQ
R
S 7
JK L
5 If you answer a call on a telephone that is on the
same line as the On-Air DECTf@x Plus, and the
call is a fax, you activate the On-Air DECTf@x Plus
by pressing # then 7 on the telephone keypad then
hanging up the telephone when you hear the tones
from the On-Air DECTf@x Plus.
This function works only when printing faxes of two
pages or more stored in memory. This function
cannot be permanently set, you have to request it
each time you print.