BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 14)

Setting up
13
2 Press OK/Menu , the display shows WITHOUT
and WITH.
3 Move the cursor to
WITH and press
OK/Menu
to confirm the entry. The display shows
ENTER PREFIX.
4 Enter the required prefix and press OK/Menu
to confirm the entry. The display shows
NUMBER LENGTH. This allows you to set the
minimum length of numbers which require the
prefix and will prevent the prefix being dialled
when calling internal numbers. It should be
set to at least one more than the length of your
longest internal number. So, if your internal
numbers are all 4 digits, set it to 5.
5 Press OK/Menu to confirm the entry.
6 Press Stop to return to standby.
Ring settings
To set the number of rings before the
machine answers automatically
1 Press OK/Menu then 2 then 6 . The display
shows
26 NO OF RINGS. Press
OK/Menu .
MN
O 6
AB
C 2
2 Use the keypad to enter the number you
require (2-9).
3 Press OK/Menu to confirm the entry.
To set the ring melody
1 Press OK/Menu then 2 then 3 . The display
shows
23 RING MELODY. Press
OK/Menu .
You will hear the current ringing tone and
the display will show the current setting.
2 Press the ᮡ and ᮢ buttons to scroll through
the options. You can also select WITHOUT
RING to have no ringer tone at all.
3 Use the + and - buttons to select the volume.
There are 4 levels.
4 Press OK/Menu to confirm your choices.
When WITHOUT RING is selected the
TEL icon
will flash constantly in the display.
DE
F 3
AB
C 2