Answering mode – BT On-Air DECTf@x Plus F@x machine and digital telephone system User Manual

Page 30

Using your handset

To end the call, press the

red

button.

You can dial the number before pressing the

green

button:

Dial the number you want to call.
Use the

button to delete numbers to make

sure you don’t dial a wrong number.

Press the

green

button. The number entered

is dialled after a few seconds.

To receive a call

When your handset rings press the

green

button.

Press the

red

button to hang up after the call

is over.

Answering mode

You can set the handset to automatically
answer and finish calls when you remove and
replace the handset in the charger. There are 3
settings: -
Mode

0: the feature is off and you must always

press the

green

button to answer a call and the

red

button to end a call.

Mode

1: lift the handset from the charger whilst

it is ringing and it will automatically answer the
call.
Replacing the handset in the charger will end
the call.
Mode

2: you must always press the

green

button to answer a call but replacing the
handset in the charger will end the call.

To choose the mode

Press

. The display shows

F (function).

Then press

. The display shows

F8 and the

current mode setting (

0 , 1 or 2).

Use the

▲

or the

▼

button to change the

mode.

If you hear beeping from the handset while you are

using it, it means that the battery is running low

and needs charging.

If you hear fax tones when you answer the handset

pressing

then

will automatically transfer the

signal to the fax machine.

NOTE

If the handset is not in the charger then you must

always press the

green

button to answer a call and

the

red

button to end a call.