Brady 200M-e 300 - Manual (Page 90)

80 Bradyprinter 200M-e and 200M-e 300 User’s Guide
FEED Key Self Test
See Figure 33.
1. Turn off the printer.
2. Press and hold the FEED key
while turning on the power.
The FEED Key Self Test prints
out at various darkness settings
above and below that of the
darkness value shown on the
configuration label. Look at these
labels and determine which one
has the best darkness setting for
your application. This value can
be entered into the printer by
setting the darkness during the
configuration procedure. Refer to
page 44 for more information.
The value printed on that label is
added to (plus) or subtracted from (minus) the darkness value specified on
the configuration label. The resulting numeric value (0 to 30) is the best
darkness value for that specific media/ribbon combination.
Figure 33