Brady 200M-e 300 - Manual (Page 76)

66 Bradyprinter 200M-e and 200M-e 300 User’s Guide
&OHDQLQJ WKH 6QDS 3ODWH
Clean the snap plate to remove label adhesive or a label that has adhered to
the underside of the snap plate.
Refer to Figure 28.
1. Insert a small-blade screwdriver or similar tool into the loop on the left
side of the snap plate. Lift the snap plate.
CAUTION: Take care not to bend, twist, or otherwise deform
the loops!
2. Repeat step one on the right side of the snap plate.
3. Remove the snap plate from the printer.
4. Clean the snap plate with cleaning solvent and a soft cloth.
Figure 28