Brady 200M-e 300 - Manual (Page 42)

32 Bradyprinter 200M-e and 200M-e 300 User’s Guide
&XWWHU 0RGH
(Cutter option required)
Refer to Figure 18.
1. Open the printhead.
2. Slide the media guide and media supply guide as far from the printer
frame as possible.
3. Load media as shown.
4. Slide in the media guide and media supply guide so they just touch,
but don’t restrict, the edge of the roll.
5. Close the printhead.
6. The printer automatically feeds out and cuts one label when the printer
is turned on.
Figure 18