beautypg.com

Brady 200M-e 300 User Manual

Page 66

background image

56

Bradyprinter 200M-e and 200M-e 300 User’s Guide

Selecting ZPL Mode

Press

Display Shows

Action/Explanation

ZPL MODE

Selecting ZPL Mode: Press the (+) or (–) key to display other
choices.
Default: ZPL II
Selections: ZPL II, ZPL
The printer remains in the selected mode until it is changed by
this front panel instruction or by using a ZPL/ZPL II command.
The printer accepts label formats written in either ZPL or ZPL II.
This eliminates the need to rewrite any ZPL formats you already
have. For more details, contact Technical Support.

Power-Up and Head Close Parameters

MEDIA POWER UP

Media Power-Up: Press the (+) or (–) key to display other
choices.
Default: Calibration
Selections: Feed, calibration, length, and no motion
This parameter establishes the action of the media when the
printer is turned on.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.

HEAD CLOSE

Head Close: Press the (+) or (–) key to display other choices.
Default: Calibration
Selections: Feed, calibration, length, no motion
Determines the action of the media after the printhead has been
opened and then closed.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.

This manual is related to the following products: