Neff C67P70N3GB - Manual (Page 18)

18
and baking are burnt to ash. The pyrolytic cleaning programme
takes approx. 2 hours, including the heating up and cooling
down times.
Notes
■
For safety reasons, the oven door locks automatically. You
cannot open the oven door again until the cooking
compartment has cooled slightly and the padlock symbol for
the locking mechanism disappears. Do not attempt to push in
the latch by hand.
■
Do not attempt to open the appliance door while self-cleaning
is in operation. The cleaning process may be cancelled.
■
The cooking compartment light remains off during self-
cleaning. The temperature control bars do not appear.
:
Risk of fire!
■
The outside of the appliance becomes very hot. Make sure
that nothing is placed against the front of the appliance.
Small children must be kept at a safe distance from the
appliance.
■
Never hang combustible objects, e.g. tea towels, on the door
handle.
Preparation
Take all accessories and ovenware out of the oven.
:
Risk of serious damage to health.!
Never use pyrolytic cleaning for cleaning non-stick baking trays
and baking tins. High temperatures damage the non-stick
coating and poisonous gases are released.
:
Risk of fire!
Loose food residues, grease and meat juices may catch fire.
Wipe the oven floor, the inside of the oven door and the edges
around the front of the oven with a damp cloth. Do not scour
the oven seal.
Note: It is sufficient to clean the cooking compartment every
two to three months. If requiered, you can clean the oven more
frequently than this. Cleaning only requires approximately
3.8 kilowatt hours.
Setting pyrolytic cleaning
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Turn the operating mode selector until the V Pyrolytic
cleaning appears on the text display.
3. Start the cleaning operation with ƒ .
The oven door locks shortly after operation starts. “Door
locked” appears in the text display.
Once pyrolytic cleaning has finished
Cleaning has finished. The oven stops heating. “Appliance is
ready for use” appears on the text display.
Checking the cleaning time
Press the clock function button
à twice. The remaining
cooking time without cooling down time is shown for a few
seconds.
Cancelling the setting
Switch off the appliance using the operating mode selector. If
the oven is already locked, you cannot open the oven door until
the “Door locked” display goes out.
Setting cleaning to run overnight
So that you can use your oven throughout the day, delay the
end of the cleaning process to during the night. See the section
Electronic clock, Setting a later end time.
After cleaning
Once the cooking compartment has cooled down, wipe out the
ash that has been left behind in the cooking compartment with
a damp cloth.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
Notes
■
Slight differences in colour on the front of the appliance are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
■
Unpleasant odours, e.g. after fish has been prepared, can be
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use