Press the ƒ button, Checking the total or remaining cooking time, The cooking time has elapsed – Neff C67P70N3GB User Manual

Page 14: Opening the oven door during cooking, Changing the setting, Note, Memory, Storing settings in the memory, Press the l button, Starting the memory

Set the third microwave power setting and cooking time.

Press the

button.

Appliance operation begins. The clock display shows the

cooking time of the first operation in the series. The

for the

first operation in the series lights up.

Checking the total or remaining cooking time
Press the clock function button

twice to display the

remaining cooking time.

The cooking time has elapsed
A signal sounds. The series of operations is finished. To stop

the signal, press the

„

button. Switch off or reset the

appliance.

Opening the oven door during cooking
Operation is suspended.

flashes. After closing the door,

press the

button. The programme will then continue.

Changing the setting
Changes can only be made before operation begins. Press

the

°±²

button to go to the desired setting, and make the

changes.

Note: You can also combine an operating mode with the

SeriesOperations function. First, set the oven operating mode.

Memory

Memory gives you the option to store your own settings and

call them up again at the press of a button. There are six

memory locations available. The memory function is useful for

recipes which you prepare particularly frequently.
In this section, you can read about

■

how to save the memory

■

how to start the memory

Storing settings in the memory

Exception: pyrolytic cleaning cannot be stored.
Requirement: the operating mode selector must not be pushed

in.

Set the operating mode, temperature and cooking time for

the meal you wish to cook or select a programme. Do not

start.

Press the

button.

“Memory 1 free” appears.

Using the operating mode selector, select one of the six

memory locations.

Press and hold the

button, a signal sounds and “Memory

saved” appears.

Starting the memory

You can start cooking at any time using the settings saved for

your meal.
Requirement: the operating mode selector must not be pushed

in.
Place your food in the cooking compartment.

Press and release the

button and use the rotary selector

to select the memory location.
The stored settings are displayed. If “Memory location empty”

appears, no setting has been saved in this memory location

yet.

Press the

button.

The memory setting starts.

Changing the memory location
Once operation has started, you can no longer change the

memory location.

Changing the settings
This can be done at any time. The setting you originally saved

appears the next time you start the memory.

Electronic clock

Your appliance has various clock functions.
In this section, the following are explained:

■

The clock display

■

How to set the timer

■

How to switch off your appliance automatically (cooking time

and end of operation)

■

How to switch your appliance on and off automatically

(preselection mode)

■

How to set or change the clock.

Clock display

&ORFNIXQFWLRQEXWWRQ

5RWDU\VHOHFWRU

Clock function

Use

Timer

You can use the minute minder as an egg timer or a kitchen timer. The appliance does

not switch on or off automatically

Cooking time

The appliances switches off automatically after a cooking time setting has elapsed

(e.g.

‚

„‹

hours)