Neff C67P70N3GB - Manual (Page 15)

15
Notes
■
Between the times ƒƒ : ‹‹ and † : †Š the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■
When using the minute minder Q , cooking time x , end
time y and preselection mode clock functions, a signal
sounds and the corresponding symbol flashes when the set
time has expired. To stop the audible signal early, press the
clock function button.
■
You can check your settings at any time. Press the clock
function button repeatedly until the corresponding symbol
lights up.
■
If you wish to cancel a setting, turn the set time back to ‹ : ‹‹
and switch the appliance off.
■
The setting can be corrected using the rotary selector if
necessary.
Switching the clock display on and off
Turn the operating mode selector back to the
Û position and
push it in.
1. Press and hold the clock function button à for a few
seconds.
The clock display is switched off. If a clock function is active,
the associated symbol remains illuminated.
2. Press and hold the clock function button à for a few
seconds.
The clock display switches on.
Minute minder
1. Press the clock function button à repeatedly until the KJ
and Q symbols light up.
2. Use the rotary selector to set the cooking time (e.g. † : ‹‹
minutes).
The setting is applied automatically. Afterwards, the clock is
displayed again and the timer counts down.
Cooking time
Automatic switch off after a certain period of time.
1. Set the operating mode and temperature.
2. Press the clock function button à repeatedly until the KJ
and x symbols light up.
3. Set the cooking time using the rotary selector
(e.g. ‚ : „‹ hours).
4. Press the ƒ button.
The appliance heats up.
5. Turn operating mode selector to Û position and press in.
Once operation time has elapsed, the appliance switches off
automatically.
End of operation
Automatic switch-off at a set time.
1. Set the operating mode and temperature.
2. Press the clock function button à repeatedly until the KJ
and y symbols light up.
3. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ ).
4. Press the ƒ button.
The appliance switches off automatically at the time that has
been set for the end of operation.
5. Turn operating mode selector to Û position and press in.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the clock functions for cooking
time x and end of operation y .
1. Set the operating mode and temperature.
2. Press the clock function button à repeatedly until the KJ
and x symbols light up.
3. Set the cooking time using the rotary selector
(e.g. ‚ : „‹ hours).
4. Press the clock function button à repeatedly until the KJ
and y symbols light up.
5. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ ).
y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ : „‹ )
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
3 Clock Setting the clock
f Rapid heat up Shortens the heat up time
Clock function Use