Nokia N93 - Manual (Page 83)

Co
n
n
ec
ti
vit
y
82
See "Pair devices", p. 83. Activate the remote SIM mode
from the other device.
When the remote SIM mode is on in your Nokia device,
Remote SIM is displayed in the standby mode. The connection
to the wireless network is turned off, as indicated by in
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network coverage.
However, a wireless LAN connection remains active during
the remote SIM mode.
Warning: In the remote SIM mode, you cannot
make or receive any calls with your device, except
make calls to certain emergency numbers, or use
other features that require network coverage. To
make calls, you must first exit the remote SIM mode.
If the device has been locked, enter the lock code.
To exit the remote SIM mode, press , and select Exit
rem. SIM mode .
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden . In this
way, you can better control who can find your device with
Bluetooth wireless technology and connect to it.
Do not pair with or accept connection requests from an
unknown device. In this way, you can better protect your
device from harmful content.
Send data
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open
Gallery .
2 Select the item and Options > Send > Via Bluetooth .
Devices with Bluetooth technology within range start
to appear on the display.
Device icons are: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop .
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter
a passcode. See "Pair devices", p. 83.