Nokia N93 - Manual (Page 113)

Troubleshooting
112
Troubleshooting
Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service provider.
For information about passwords, contact your access
point provider, for example, a commercial internet service
provider (ISP) or wireless service provider.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold .
Scroll to the application, and press to close the application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated
Bluetooth connectivity.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in the hidden mode.
Check that both devices are compatible.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can
either end the connection using the other device or by
deactivating Bluetooth connectivity. Select
Connect. >
Bluetooth > Off .
Browser services
Q: What do I do if the following message is displayed: No valid
access point defined. Define one in Services settings. ?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Camera
Q: Why do images look smudgy?
A: Remove the protective plastic film covering the display
and camera. Ensure that the camera lens protection
window is clean.
Q: Why is there audible noise from the camera when autofocus
or optical zoom is used?
A: Zoom and AF lens movement causes mechanical noise.
S elect Options > Settings > Optical zoom during
recording > Off to eliminate mechanical noise caused
by lens movement when recording.
Q: Why do images or videos captured using night mode tend
to be noisier under dark lighting conditions compared to
normal mode?