Nokia N93 - Manual (Page 61)

Mak
e calls
60
Answer or decline a call
To answer the call in the fold-open mode, press . If
Answer if fold opened is set to Yes , to answer a call in the
fold-closed mode, open the fold, and the call starts
automatically. Otherwise, open the fold, and press
.
To mute the ringing tone when a call comes in, select Silence .
Tip! If a compatible headset is connected to the
device, to answer and end a call, press the
headset key.
If you do not want to answer a call, in the fold-open mode,
press
to decline it. The caller hears a line busy tone. If
you have activated the Call forward > If busy function to
forward calls, declining an incoming call also forwards the
call. See "Call forwarding", p. 106.
When you decline an incoming call with the fold open, you
can also send a text message to the caller informing why you
cannot answer the call. Select
Options > Send msg. . You can
edit the text before sending it. To set up this option and write
a standard text message, see "Call settings", p. 100.
Answer or decline a video call
When a video call arrives, is displayed.
Tip! You can assign a ringing tone for video calls.
Press
, and select Tools > Profiles , a profile, and
Options > Customize > Video call tone .
In the fold-open mode, press to answer the video call.
To start sending video, activate the view mode, and a live
video image, recorded video clip, or the image being
captured by the camera in your device is shown to the caller.
If you want to send a live video image, turn the camera unit
to the direction from which you want to send the video image.
If you do not activate the view mode, video sending is not
possible, but you can still hear the other person. A grey screen
is shown in place of the video. To replace the grey screen with
a still image, see "Call settings",
Image in video call , p. 100.
Even if you have denied video sending during a video call,
the call is still charged as a video call. Check the pricing
with your service provider.
To end the video call, in the view mode or with the fold
open, press
.
Call waiting (network service)
You can answer a call while you have another call in progress
if you have activated
Call waiting in Tools > Settings >
Call > Call waiting .
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap . Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press
. To end both
calls, select Options > End all calls .