Nokia N93 - Manual (Page 66)

C
o
n
tact
s (phone
book)
65
1 In the address book, select a contact, and press .
2 Select Options > Defaults .
3 Select a default to which you want to add a number or
an address, and select Assign .
4 Select a number or an address you want to set as a default.
The default number or address is underlined in the
contact card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options > SIM
contacts > SIM directory . Select the names you want to
copy and Options > Copy to Contacts .
To copy contacts to your SIM card, press , and select
Contacts . Select the names you want to copy and
Options > Copy to SIM direct. , or Options > Copy >
To SIM directory . Only the contact card fields supported
by your SIM card are copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
SIM directory and services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider or other vendor.
Press , and select Contacts > Options > SIM contacts >
SIM directory to see the names and numbers stored on the
SIM card. In the SIM directory you can add, edit, or copy
numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialing contacts . This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone numbers,
select
Options > Activ. fixed dialing . To add new numbers
to the fixed dialing list, select Options > New SIM contact .
You need the PIN2 code for these functions.
When you use Fixed dialing , packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be included
on the fixed dialing list.
When fixed dialing is activated, calls may be possible to the
official emergency number programmed into your device.
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes it).
1 Press to open a contact card or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone . A list of ringing
tones opens.