Nokia N93 - Manual (Page 104)

Tools
103
Pre-shared key (only for Pre-shared key )—Enter a password.
The same password must be entered on the wireless LAN
access point device.
TKIP encryption —Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage —Define a home page.
Select Options > Advanced settings and from the following:
IPv4 settings : Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address —Enter the IP
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
IPv6 settings > DNS address —Select Automatic ,
Well-known , or User defined .
Ad-hoc channel (only for Ad-hoc )—To enter a channel
number (1-11) manually, select User defined .
Proxy serv. address —Enter the address for the proxy server.
Proxy port number —Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn. —If you select When available and you are
in a network that supports packet data, the device registers
to the packet data network. Starting an active packet data
connection (for example, to send and receive e-mail) is quicker.
If there is no packet data coverage, the device periodically
tries to establish a packet data connection. If you select
When needed , the device uses a packet data connection
only if you start an application or action that needs it.
Access point —The access point name is needed to use your
device as a packet data modem to your computer.
Wireless LAN
Show availability —Select whether is displayed when
a wireless LAN is available.
Scan for networks —If you set Show availability to Yes ,
select how often the device searches for available wireless
LANs and updates the indicator.
To view advanced settings, select Options > Advanced
settings . Changing wireless LAN advanced settings is
not recommended.
Configurations
You may receive trusted server settings from your service
provider in a configuration message or the settings may be
stored on your USIM card. You can save these settings to
your device, view, or delete them in
Configs. .
Date and time
See "Clock settings", p. 16 and language settings in
"General", p. 98.