Nokia N93 - Manual (Page 82)

Co
n
n
ec
ti
vit
y
81
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Hands-Free Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, Basic Imaging Profile, SIM Access Profile, and
Human Interface Device Profile. To ensure interoperability
between other devices supporting Bluetooth technology,
use Nokia approved enhancements for this model. Check
with the manufacturers of other devices to determine their
compatibility with this device.
Glossary: A profile corresponds to a service or a
function and defines how different devices connect.
For example, the Hands-Free Profile is used between
the hands-free device and the phone. For devices to
be compatible, they must support the same profiles.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See "Security", p. 104 for more information
on locking the device.
Settings
Press , and select Connect. > Bluetooth . When you open
the application for the first time, you are asked to define a
name for your device. After you set Bluetooth connectivity
on and change
My phone's visibility to Shown to all , your
device and this name can be seen by other users with devices
using Bluetooth technology.
Select from the following:
Bluetooth —Select On or Off . To connect wirelessly to
another compatible device, first set Bluetooth connectivity
On , then establish a connection.
My phone's visibility —To allow your device to be found by
other devices with Bluetooth technology, select Shown to
all . To hide it from other devices, select Hidden .
My phone's name —Edit the name of your device.
Remote SIM mode —To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select
On .
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on and enable the
use of the remote SIM mode with your device. Before the
mode can be activated, the two devices must be paired and
the pairing initiated from the other device. When pairing, use
a 16-digit passcode and set the other device as authorized.