Nokia N93 - Manual (Page 56)

Mak
e calls
55
To have a private conversation with one of the
participants, select
Options > Conference > Private .
Select a participant, and select Private . The conference
call is put on hold on your device. The other participants
can still continue the conference call. When you finish
the private conversation, select
Options > Add to
conference to return to the conference call.
To drop a participant, select Options > Conference > Drop
participant , scroll to the participant, and select Drop .
4 To end the active conference call, press .
1-touch dialing
To activate 1-touch dialing, press , and select Tools >
Settings > Call > 1-touch dialing > On .
To assign a phone number to one of the 1-touch-dialing
keys (
— ), press , and select Tools > Spd. dial .
Scroll to the key to which you want to assign the phone
number, and select
Options > Assign . is reserved for
the voice mailbox.
To call in the standby mode, press the 1-touch-dial key
and .
Voice dialing
Your device supports enhanced voice commands. Enhanced
voice commands are not dependent on the speaker’s voice;
you do not record voice tags in advance. Instead, the device
creates a voice tag for the entries in contacts, and compares
the spoken voice tag to it. The voice recognition in the device
adapts to the main user’s voice to recognize the voice
commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select
Options > Play
voice tag .
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use.
Hold the device at a short distance away when you say the
voice tag.
1 To start voice dialing, in the standby mode, press and
hold . If you are using a compatible headset with
the headset key, press and hold the headset key to start
voice dialing.
2 A short tone is played, and Speak now is displayed.
Say clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesized voice tag for the recognized
contact in the selected device language, and displays
the name and number. After a timeout of 2.5 seconds,
the device dials the number.