Synchronise data, Device manager, Connectivity – Nokia N72 User Manual
Page 90
Connectivity
89
Copyright © 2006 Nokia. All rights reserved.
Accept all sync reqs.
—Select
No
if you want your
device to ask you before a synchronisation initialised by
the server is started.
Network authentic.
(shown only if
Data bearer
is set
to
Web
)—Select
Yes
to enter a network user name and
password. Press
to view the user name and
password fields.
Press
to select
Contacts
,
Calendar
, or
Notes
.
•
Select
Yes
if you want to synchronise the selected
database.
•
In
Remote database
, enter a correct path to the
remote calendar, address book, or notes database on
the server.
•
Select
Synchronisation type
:
Normal
(two-way
synchronisation),
To server only
, or
To phone only
.
3
Select
Back
to save the settings and return to the main
view.
Synchronise data
In the
Sync
main view, you can see the different
synchronisation profiles and the kind of data to be
synchronised.
1
Select a synchronisation profile and
Options
>
Synchronise
. The status of the synchronisation is
shown at the bottom of the screen.
To cancel synchronisation before it finishes, select
Cancel
.
2
You are notified when the synchronisation is complete.
After synchronisation is complete, select
Options
>
View log
to open a log file showing the
synchronisation status (
Complete
or
Incomplete
) and
how many calendar or contact entries, or notes have
been added, updated, deleted, or discarded (not
synchronised) in your device or on the server.
Device manager
Press ,
and
select
Connect.
>
Dev. mgr.
. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select
Options
>
Start configuration
.
To allow or deny receiving of configuration settings from
service providers, select
Options
>
Enable config.
or
Disable config.
.