Nokia N72 - Manual (Page 30)

Contacts (Phonebook)
29 Copyright © 2006 Nokia. All rights reserved.
2 Select Options > Defaults .
3 Select a default to which you want to add a number or
an address and
Assign .
4 Select a number or an address you want to set as a
default.
Copy contacts
If you have phone numbers stored on the SIM card, copy
them to
Contacts . Entries that are saved only on the SIM
card are not shown in the contacts directory, and for
incoming calls and messages, the device cannot match the
number to the name.
When a new SIM card is inserted in the device and you
open
Contacts for the first time, you are asked if you want
to copy the contact entries on the SIM card to the device
memory. Select
Yes to copy the entries to your contacts
directory.
To copy individual names and numbers from a SIM card to
your device, press
, and select Contacts > Options >
SIM contacts > SIM directory . Select the names you want
to copy and Options > Copy to Contacts .
To copy contacts to your SIM card, press , and select
Contacts . Select the names you want to copy and
Options > Copy to SIM direct. , or Options > Copy > To
SIM directory . Only the contact card fields supported by
your SIM card are copied.
Tip! You can synchronise your contacts to a
compatible PC with Nokia PC Suite. See the CD-ROM
supplied with your device.
SIM directory and other SIM services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialling numbers, select Options >
SIM contacts > Fixed dialling contacts . This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select
Options > Activ. fixed dialling . To add
new numbers to the fixed dialling list, select Options >
New SIM contact . You need the PIN2 code for these
functions.
When you use Fixed dialling , packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient’s phone number must be
included on the fixed dialling list.