Nokia N72 - Manual (Page 64)

Messaging
63 Copyright © 2006 Nokia. All rights reserved.
Receive adverts —Define whether you want to receive
multimedia message advertisements.
Receive report —Select Yes if you want the status of the
sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address might not be possible.
Deny report sending —Select Yes if you do not want your
device to send delivery reports of received multimedia
messages.
Message validity —If the recipient of a message cannot be
reached within the validity period, the message is removed
from the multimedia messaging centre. The network must
support this feature.
Maximum time is the maximum
amount of time allowed by the network.
Tip! You may also obtain the multimedia and e-mail
settings from your service provider through a
configuration message. Contact your service provider
for more information. See ‘Data and settings’, p. 57.
E-mail
Select Messaging > Options > Settings > E-mail , or in the
mailbox main view, select Options > E-mail settings and
from the following:
Mailbox in use —Select which mailbox you want to use for
sending e-mail.
Mailboxes —Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to do so. Select a mailbox to change the
following settings:
Mailbox settings , User settings , and
Automatic retrieval .
Mailbox settings :
Mailbox name —Enter a descriptive name for the mailbox.
Access point in use ( Must be defined )—Choose an
Internet access point (IAP) for the mailbox. See
‘Connection settings’, p. 96.
My e-mail address ( Must be defined )—Enter the e-mail
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server ( Must be defined )—Enter the IP
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
Send message —Define how e-mail is sent from your
device. Select Immediately for the device to connect to
the mailbox when you select Send message . If you select
When conn. avail. , e-mail is sent when the connection to
the remote mailbox is available.
User name —Enter your user name, given to you by your
service provider.