Nokia E72 - Manual (Page 75)

The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
To turn trip distance calculation on or off, select
Options >
Start or Stop . The calculated values remain on the display.
Use this feature outdoors to receive a better GPS signal.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Options > Reset . To set the trip meter and total
time to zero, select Restart .
Positioning settings
Select Menu > Ctrl. panel > Settings and General >
Positioning .
Positioning methods
Select from the following:
•
Integrated GPS — Use the integrated GPS receiver of
your device.
• Assisted GPS — Use Assisted GPS (A-GPS) to receive
assistance data from an assistance data server.
• Bluetooth GPS — Use a compatible external GPS
receiver with Bluetooth connectivity.
• Network based — Use information from the cellular
network (network service).
Positioning server
To define an access point and positioning server for
network-assisted positioning methods, such as assisted
GPS or network-based positioning, select Positioning
server . The positioning server may be preset by your
service provider, and you may not be able to edit the
settings.
Notation settings
To select which measurement system you want to use for
speeds and distances, select Measurement system >
Metric or Imperial .
To define in which format the coordinate information is
displayed in your device, select Coordinate format and
the desired format.
75
Positioning (GPS)