Nokia E72 - Manual (Page 125)

Contact your internet service provider for these
addresses.
• IPv6 settings — Define the type of DNS address.
• Ad-hoc channel (only for ad hoc networks) — To enter
a channel number (1-11) manually, select User
defined .
• Proxy server address — Enter the address for the
proxy server.
• Proxy port number — Enter the proxy port number.
Packet data (GPRS) settings
Select Menu > Ctrl. panel > Settings and Connection >
Packet data .
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
in GSM and UMTS networks, it is possible to have multiple
data connections active at the same time; access points
can share a data connection, and data connections remain
active, for example, during voice calls.
To define the packet data settings, select
Packet data
connection and When available to register the device to
the packet data network when you switch the device on
in a supported network, or When needed to register the
device to a packet data network only when an application
or action attempts to establish a packet data connection.
This setting affects all access points for packet data
connections. To use the device as a packet data modem
for your computer, select Access point , and enter the
access point name provided by your service provider. To
use a high-speed data connection, select High speed
packet access > Enabled .
WLAN settings
Select Menu > Ctrl. panel > Settings and Connection >
Wireless LAN .
To have an indicator displayed when there is a wireless
LAN (WLAN) available in your current location, select Show
WLAN availability > Yes .
To select the interval for your device to scan for available
WLANs, and to update the indicator, select Scan for
networks . This setting is not available unless you select
Show WLAN availability > Yes .
To set the device to test the internet capability of the
selected WLAN automatically, to ask for permission every
time, or to never perform the connectivity test, select
Internet connectivity test > Run automatically , Ask
every time , or Never run . If you select Run
automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed
successfully, the access point is saved to internet
destinations.
To check the unique media access control (MAC) address
that identifies your device, enter *#62209526# in the
home screen. The MAC address is displayed.
Advanced WLAN settings
Select Options > Advanced settings . The advanced
WLAN settings are normally defined automatically, and
changing them is not recommended.
To edit the settings manually, select
Automatic
configuration > Disabled and define the following:
125
Se
ttings