Nokia N91 - Manual (Page 44)

Me
dia a
ppli
cations
43
Tip! To view a video clip in full screen mode,
press
. Press again to change back to normal
screen mode.
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your device.
Contact your service provider for more information.
In RealPlayer , you can only open an rtsp:// URL address.
However, RealPlayer will recognize an http link to a
.ram file.
To stream content over the air, select a streaming link
saved in
Gallery , on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and starts
loading the content. The content is not saved in your device.
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See “Data and settings,” p. 54. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video —To adjust the contrast of the video and to have
RealPlayer automatically repeat video clips after they
finish playing.
Connection —To select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider
for the correct settings.
Proxy sett. :
• Use proxy —Select Yes .
• Proxy serv. address —Enter the IP address of the
proxy server.
• Proxy port number —Enter the port number of
the proxy server.
Glossary: Proxy servers are intermediate servers
between media servers and their users. Some service
providers use them to provide additional security
or speed up access to browser pages that contain
sound or video clips.
Netw. sett. :
• Default access point —Scroll to the access point you want
to use to connect to the Internet, and press the joystick.
• Online time —Set the time for RealPlayer to disconnect
from the network when you have paused a media clip
playing through a network link, select
User defined ,
and press the joystick. Enter the time, and select OK .