Nokia N91 - Manual (Page 102)

Tools
101
To start using a compatible GPS receiver with Bluetooth
connectivity for positioning, scroll to
Bluetooth GPS , and
select Options > Enable . If asked, select your GPS receiver
from the found devices with Bluetooth connectivity, and
pair the devices. See “Pair devices,” p. 83.
The Global Positioning System
The Global Positioning System (GPS) is operated by the
United States government, which is solely responsible
for accuracy and maintenance of the system. The accuracy
of location data can be affected by adjustments to GPS
satellites made by the United States government and is
subject to change with the United States Department of
Defense civil GPS policy and the Federal Radionavigation
Plan. Accuracy can also be affected by poor satellite
geometry. Availability and quality of GPS signals may be
affected by your location, buildings and natural obstacles
as well as weather conditions. The GPS receiver should only
be used outdoors to allow reception of GPS signals. GPS
should only be used as a navigation aid. It should not be
used for precise location measurement and you should
never rely solely on location data from the GPS receiver
for positioning or navigation.
You may receive a request from a network service to
receive your position information. Service providers may
offer information about local topics, such as weather or
traffic conditions, based upon the location of your device.
When you receive a position request, a message is
displayed showing the service that is making the request.
Select
Accept to allow your position information to be
sent, or select Reject to deny the request.
Landmarks
Press , and select Tools > Landmarks . With
Landmarks , you can save the position information of
specific locations in your device. You can sort the saved
locations into different categories, such as business, and
add other information, such as addresses. You can use your
saved landmarks in compatible navigation applications,
such as
Navigator in your Nokia N91.
To create a new landmark, select Options > New
landmark . If your device is connected to a compatible
GPS receiver, you can make a positioning request for
the coordinates of your current location. Select
Current
position to retrieve the position information. To enter the
position information manually, select Enter manually .
To edit or add information to a saved landmark, for
example, a street address, scroll to a landmark, and
press the joystick. Scroll to the desired field and enter
the information.