Nokia N91 - Manual (Page 39)

Me
dia a
ppli
cations
38
Exposure modes
• To set the camera to take six pictures in a sequence,
select Options > Sequence mode . You can also use
the sequence mode with the Self-timer . See “You in
the picture—self-timer,” p. 38. The pictures are
automatically saved in
Gallery .
After you take the pictures, they are shown in a grid
on the main display. To view a picture, press the
joystick to open it.
• To set the camera to take pictures in low light
conditions, select Options > Night mode
You in the picture—self-timer
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select
Options > Self-timer > 10 seconds , 20 seconds ,
or 30 seconds . To activate the self-timer, select Activate .
The self-timer indicator ( ) blinks and the device beeps
when the timer is running. The camera takes the picture
after the selected delay elapses. You can also use the
Self-
timer in the sequence mode. See “Exposure modes,” p. 38.
Adjust color
To enable the camera to reproduce colors more accurately,
or to add effects to your pictures or videos, select
Options >
Adjust , and select from the following options:
White balance —Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Color tone —Select a color effect from the list.
The screen display changes to match any settings made,
showing you how the change affects the pictures or videos.
The settings return to the default settings when you close
the camera.
Adjust still image camera settings
To change the main settings, select Options > Settings .
These settings remain the same until you change them.
Select from the following options:
Image quality — High , Normal , or Basic . The better the
image quality, the more memory the image consumes.
Image resolution —Select the resolution you want to use.
The higher the image resolution, the more memory the
image consumes. The quality of a zoomed picture is lower
than that of a nonzoomed picture.
Default image name — Set a name for the pictures taken.
For example, if you set Beach as the default name, Camera
will name the pictures you take Beach, Beach(001),
Beach(002), and so on, until you change the setting again.
Show captured img. —Select Yes if you want to see
the captured image after it is taken, or No if you want
to continue taking pictures immediately.
Memory in use —Select where to store your images.