beautypg.com

Essential indicators, You r nokia n91 – Nokia N91 User Manual

Page 14

background image

You

r Nokia

N91

13

2 The device searches for wireless LANs within range.

To create an Internet access point in a network,
select

Options

>

Define access point

.

3 The device creates an Internet access point with default

settings. To view or change the settings of the Internet
access point, see “Access points,” p. 93.

When an application asks you to select an access point,
select the created access point, or

Search for WLAN

,

to search for wireless LANs in range.

A wireless LAN connection is established when you create
a data connection using a wireless LAN Internet access
point. The active wireless LAN connection ends when
you end the data connection. To end the connection,
see “Connection manager,” p. 85.

You can use wireless LAN during a voice call or when
packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same wireless LAN connection.

When you activate the

Offline

profile, you can still use

wireless LAN (if available). Remember to comply with
any applicable safety requirements when establishing
and using a wireless LAN connection.

There are two operating modes in wireless LAN:

Infrastructure

and

Ad-hoc

.

The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a wireless LAN access point device, or
wireless devices are connected to a wired LAN through
a wireless LAN access point device.

In the ad hoc operating mode, devices can send and receive
data directly with each other. To create an Internet access
point for the ad hoc network, see “Access points,” p. 93.

Tip! To check the unique Media Access Control
(MAC) address that identifies your device, enter
*#62209526# in the standby mode.

Essential indicators

The phone is being used in a GSM network.

(network service)
The phone is being used in a UMTS network.

See “Network,” p. 100.

You have one or more unread messages in the

Inbox

folder in

Messag.

.

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the

Outbox

folder. See “Outbox—messages waiting

to be sent,” p. 57.