Toshiba Qosmio E10 - Manual (Page 165)

User’s Manual 9-16
Troubleshooting
LAN
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Operating Basics .
TV output signal
Refer also to your Personal Conferencing Kit’s documentation.
Problem Procedure
Cannot access LAN Check for a firm cable connection between the
LAN jack and the LAN hub.
Wake-up on LAN does
not work Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
Problem Procedure
Cannot access
Wireless LAN Make sure the computer’s wireless
communication switch is set to on.
If problems persist, contact your LAN
administrator.
Problem Procedure
Display on TV is poor Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
No display Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
The Keyboard .
If problems persist, contact your dealer.
If you turn the computer off in Standby Mode while the display is on TV, the
computer will select either the internal LCD or an external computer CRT
as the display device.