Toshiba Qosmio E10 - Manual (Page 127)

User’s Manual 7-3
HW Setup
3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
S
The password was deleted
If they do not match, the following message appears. You must repeat step 1.
S
Incorrect Password
4. Follow the same procedures described earlier in this section, to set a
new user password.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted.
If you enter the password incorrectly three times, the screen will display:
Sorry, access denied!!! Powering off your machine then
powering it back on again are required to regain
access.
You will not be able to access the password option in the HW Setup. In this
case you must turn the power off and back on to retry the procedure.
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
LCD + Analog RGB Selects both the internal LCD and external
monitor for simultaneous display.