Toshiba Qosmio E10 - Manual (Page 133)

User’s Manual 8-2
Optional Devices
PC card
The computer is equipped with a PC Card expansion slot that can
accommodate one 5 mm Type II card. Any PC Card that meets industry
standards (manufactured by TOSHIBA or other vendor) can be installed.
The slot supports 16-bit PC Cards, including PC Card 16’s multifunction
card and CardBus PC Cards.
CardBus supports the new standard of 32-bit PC Cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
Inserting a PC Card
The PC Card slot is located on the left side of the computer.
Windows hot-install feature lets you insert PC Cards while the computer’s
power is on.
To insert a PC Card, follow the steps below:
1. Insert the PC Card.
2. Press gently to ensure a firm connection.
Inserting the PC Card
3. After inserting the card, refer to the card’s documentation and check the
configuration in Windows to make sure it is appropriate for your card.
Removing a PC Card
To remove the PC Card, follow the steps below.
1. Open the Safety Remove Hardware icon on the Task Bar.
2. Click PC Card.
3. Press the PC Card eject button to extend it.
Do not insert a PC Card while the computer is in Standby Mode or
Hibernation Mode. Some cards might not work properly.
PC Card
PC Card slot
If the PC Card is not inserted all the way, the eject button may not pop out.
Be sure to push the PC Card firmly and press the eject button again.