Toshiba Qosmio E10 - Manual (Page 145)

User’s Manual 8-14
Optional Devices
1. Insert the plug of the Monitor-in cable into the Monitor-in port of your
computer.
Connecting the Monitor-in port
2. Insert the corresponding plugs of the output cable of the device you
wish to use into the sound input terminals (red: sound, right channel,
white: sound, left channel) and the video input (yellow: composite) of
the Monitor-in cable.
Connecting the Monitor-in cable
3. Insert the plugs at the other end of the output cable of the device you
wish to use into the output terminals of that device.
4. Power on the device you wish to use (connected via the output cable).
5. Press the power button of your computer to turn it on.
When you press the power button, Windows starts. If a music CD or DVD
video disk is present in the drive, automatic play is activated. In that case,
cancel it.
6. Press the Monitor-in button.
This will switch the mode to Qosmio Player. Use the buttons of the device
you have connected for operations such as playing video. Refer to the
Qosmio Engine section in Chapter 4, Operating Basic about a Monitor-in
restriction.
Exiting the Qosmio Player mode
You must first exit the Qosmio Player mode before you power off your
computer. If you power off your computer while the Qosmio Player mode is
active, data may be lost.
1. Press the Monitor-in button.
When pressing the power button of your computer, the Windows screen
appears.
yellow
Video input (yellow)
Sound left input (white)
Sound right input (red)
red
white