beautypg.com

Toshiba Magnia 3310 User Manual

Page 14

background image

5

Auto-shutdown function (ASD function)

This function enables automatic execution of the sequence from shutting down the

operating system through to turning OFF the power by operating the power/sleep

button of the server.

The supported machine model for an Agent: MAGNIA Z300/Z310/Z500

Please refer to User’s Guide of the server on you “Server Setup TooL- and Documentation

CD”.

Collect Logs function

It is the function to collect the files (log files and files of information data) for knowing a

state, the contents of an alert, and so on of the Agent machine. When the specified file

exists, those files can be transmitted to a Management Console from the Agent

machine.

(3.3.16 Collect Logs screen)

Enterprise Associated function

When some faults occur in the server, the fault reports can be informed to each of the

managers of Compaq Insight Manager (XE), OpenView and Tivoli. The contents of the

fault report to transmit are about faults of temperature, FAN, Voltage and so on.

(Appendix 9 Enterprise Association)

(Appendix 4 Local Configuration Tool)

Remote Console function

It is the function to operate the Agent machine from a Management Console. Mainly, when

a keyboard, a mouse and a monitor are not connected to the Agent machine, this

function uses.

The supported machine model for an Agent: MAGNIA Z500

(3.1.4 Remote Console screen)

(Appendix 6 Remote Console Function Setting)

HDD Connector Board Log function

It is the function to maintain the log recorded in a HDD Connector Board.

A HDD Connector Board is a board for connecting an IDE HDD. This function is

unnecessary, when an IDE HDD is not connected to the server, or when the server is

equipped with an IO device chassis.

The supported machine model for an Agent: MAGNIA Z500

LAN Alerting function

Irrespective of the state of OS of an agent machine, it is the function to report the warning

that the sensor of the hardware of an agent machine detected as SNMP Trap.

In order to use this function, on LAN Alerting Configuration screen, it is necessary to set up

the destination of SNMP Trap and to set up Gateway that is used in order to report it.

The supported machine model for an Agent: MAGNIA3310

(3.3.14 LAN Alerting Configuration screen)