Toshiba Dynadock W20 User Manual
Page 53

User’s Manual
EN-53
dynadock™ W20
I cannot get the
computer
to connect and dock
(the indicator light does
not turn solid green).
n
The computer may be too far away from the
dynadock™; move closer to the
dynadock™.
n
Make sure that there is nothing between the
computer and the dynadock™ (for example,
walls/monitors).
n
Make sure the wireless USB adaptor is
properly connected to your computer.
n
Make sure the adaptor’s antenna and the
dynadock’s antenna are in the upright
position.
n
Verify that the settings in the Wireless USB
Manager utility are configured correctly to
enable wireless communication. For more
information, please see
The connection to the
dynadock™ has been
lost.
The computer may be out of wireless
communication range. Bring the computer
within close range of the dynadock™ to
automatically reconnect.
The computer may be in standby/sleep/
hibernation mode. The computer will re-connect
when it resumes from standby/sleep/
hibernation.
The USB adaptor may have been disconnected.
Re-connect the USB adaptor to the computer.
There may be an obstruction between the
dynadock™ and your computer that is
preventing wireless communication. Remove
the obstruction.
Problem(s)
Solution(s)