Toshiba Dynadock W20 - Manual (Page 33)

User’s Manual EN-33
dynadock™ W20
Disable/Enable pop-up messages
The Options tab of the Wireless USB Manager enables you to disable or
enable pop-up messages that appear in the System
tray/Notification Area of your Windows
® desktop. For example, a pop-up
message informs you when an associated wireless USB device, such as
the dynadock™, has been connected or disconnected from your computer.
These messages are enabled by default.
(Sample Image) The Options tab
Change/Select the channel used for radio communication
The Communications tab of the Wireless USB Manager enables you to
view and change radio settings. The default channel setting is Automatic,
which enables the host radio to automatically locate an available channel
for communications.
If you wish to manually select the channel to be used for communications
between the dynadock™ and your computer, you can do so by clicking the
Requested Channel drop-down menu and then selecting any channel
from the list.
It is recommended to leave this setting on Automatic. If you manually
select a channel that is being used by another dynadock™ in the vicinity,
the channel bandwidth will be shared by both devices. To maximize
performance, a separate channel should be used for each dynadock™.
NOTE