Toshiba Dynadock W20 - Manual (Page 15)

User’s Manual EN-15
dynadock™ W20
Component Description
Antenna Send and receive wireless signals to/from the
connected computer.
USB 2.0 ports Connection points for USB 2.0 and 1.1
devices.
Note 1: Certain USB devices, such as optical
disk drives and hard disk drives, have high
power requirements. Due to the power output
limitations of the USB ports, you may not be
able to operate more than one such device at
a time.
Note 2: If your USB device came with an AC
adaptor, be sure to connect the device to a
power outlet with the AC adaptor.
DVI-I video port Connection point for a DVI monitor, or a VGA
monitor with use of the included DVI-I to VGA
adaptor.
Mini USB jack Connection point for the provided USB cable,
used to connect the dynadock™ to your
computer.
Note: When setting up a wireless connection,
you will need to use the USB cable
temporarily to form an association between
the two devices. For more information, see
“Setting up the dynadock™” on page 18 .
DC-IN Socket for AC adaptor (provided).
Note: The dynadock™ requires an external
power supply, as it does not draw power from
the computer’s USB bus.