Toshiba Dynadock W20 - Manual (Page 13)

User’s Manual EN-13
dynadock™ W20
Powered USB 2.0
port (USB Sleep
and Charge port) Connection point for USB 2.0 or 1.1 devices.
When the dynadock™ is powered on, this
port charge connected battery-powered USB
devices (such as PDAs, MP3 players, and
cellular phones) even when the dynadock™
is disconnected from your computer or your
computer is off. For more information, please
see
“Charging USB devices” on page 41 .
Note 1: Some USB devices may not support
this feature.
Note 2: Certain USB devices, such as optical
disk drives and hard disk drives, have high
power requirements.
Note 3: If your USB device came with an AC
adaptor, be sure to connect the device to a
power outlet with the AC adaptor.
Line out jack
(Headphones,
Speakers) A standard 3.5 mm mini jack for stereo audio
output to headphones/headsets/speakers.
Microphone jack A standard 3.5 mm mini jack for mono audio
input from a microphone.
Component Description
Please adjust the volume on the computer to a low level before using
headphones. Continuous exposure to a loud sound can harm your
hearing.
WARNING