Toshiba Portege 3490 - Manual (Page 47)

TOSHIBA
Addendum Sheet
In a Windows® 98 environment, the computer might not recognize the
CD-ROM or DVD-ROM drive in an optional Multi Media Port Replicator, if a
PC card is installed in the computer or in the Multi Media Port Replicator.
In that case, follow the steps below.
1. Click Start on the Windows Task Bar, point to Settings and click Control
Panel .
2. Double-click the System icon to open the System Properties
window.
3. Click the Device Manager tab and double-click Hard disk controllers .
4. Double-click Toshiba PCI-0105 IDE Controller .
5. Click the Resources tab and click the Use automatic settings check
box to clear the check mark.
6. Click an Input/Output Range and click the Change Setting … button to
open the Edit Input/Output Range dialogue box.
NOTE: Some values cannot be changed. Select the one that can be.
7. Change the Value until the Conflict Information box displays the
message: No devices are conflicting .
8. Click OK to close the Input/Output Range dialog box.
9. Click OK to close the Resources dialogue box.
10. Click Yes to close the Creating a Forced Configuration
dialogue box.
11. Click Yes to restart the computer.